Ethos SCUBA CAM - Page 3

4. Camera mode:
Turn camera on. Short press “mode” buon to toggle to Camera mode (there will be a STBY icon of a camera in upper le corner of display screen) Press
the “OK” buon to take a picture.
Shoong paern: Single shot/ Self-mer (3s/5s/20s)/ Connuous shoong
5. Recording mode:
Turn camera on. Short press “mode” buon to toggle to Recording mode (there will be a STBY icon of a video cam in upper le corner of display screen)
Press the OK buon to start recording (REC icon in upper le corner will begin to flash)
Press the OK buon again to stop recording
Resoluon of Videos Recorded: 4K 30fps/ 2.7K 30fps/ 1920*1080 60fps/ 1920*1080 30fps/ 1280*720 120fps
Note: Default seng is loop recording. You can adjust this in the Sengs mode
6. File Storage & Replaying:
Aer done recording, use a USB cable to export the videos onto a computer to play the recordings. You can also
use a data reader to access the image data on the memory card.
7. Installing and using Wi-Fi mode:
- Download and install “GoPlus CamPro” app onto your smartphone (or smart device)
Android users- download the app in Google Play
- Turn camera on, press and hold the UP buon on side of camera, then press the mode buon on front of camera. Release both buons then wait 3-4
seconds unl the Wifi icon appears on the display screen.
- On your smartphone/ smart device, go to:
Sengs -> WiFi -> select “GPLUSPRO…”
Enter the password shown on the camera display screen
Press “join”
- You can now control the camera from the GoPlus CamPro app on your smartphone/ smart device
- You can set a new WiFi password in the Sengs mode on the camera
- To disconnect the WiFi connecon, press and hold the UP buon unl the Wifi display on screen disappears.