Need help?Do you have a question about the eTIGER S4 Combo Vid Secual and is the answer not in the manual?
General| Brand | eTIGER |
|---|---|
| Model | S4 Combo Vid Secual |
| Category | Security System |
| Language | English |
Dual GSM/PSTN communication capabilities.
Arm/disarm via SMS, phone call, or mobile app.
System can be disarmed using an RFID tag.
Built-in 100dB siren and panel call function.
Alerts for power failure, recovery, and low battery.
Allows remote audio monitoring of the premises.
Includes 2x 800mAh lithium backup batteries.
Details on product name, SKU, and power supply.
GSM working frequency and radio frequency.
Standby/alarm current, backup battery type.
Housing material, dimensions, operating conditions.
Identifies LCD display, LED indicator, RFID reader, and keypad.
Locates MIC, tamper switch, speaker, SIM slot, and interfaces.
Instructions for connecting via telephone landline.
Process for inserting the SIM card for GSM mode.
Requirements for SIM card compatibility and PIN.
Steps to connect AC adapter and power on the unit.
Advice on selecting location and using the mounting bracket.
How to configure the system's communication mode.
Adding numbers for system interaction and alerts.
Procedure to set the display and SMS language.
Covers control panel, SMS, app, and RFID tag operations.
Step-by-step guide for adding accessories.
Information on assigning accessories to specific zones.
Using the call button for quick dialing.
Making calls directly from the control panel.
Steps to restore the system to factory defaults.
How to arm the system using the panel buttons.
Explanation of delay zones during arming/disarming.
How to disarm the system using the panel buttons.
Arming the system while allowing movement indoors.
Using the SOS button for immediate alarm and calls.
Accessing and navigating the system's settings menu.
Explanation of key functions within the setup menu.
Process for entering contact numbers.
Adding remote controls to the system.
Adding RFID tags for system interaction.
Adding wireless sensors to the system.
Verifying functionality of connected accessories.
Setting system clock and entry/exit delays.
Configuring automatic arming/disarming times.
Enabling phone control and setting Linecut/GSM alerts.
Admin, user, duress codes, and keypad tones.
Configuring call ring times and siren behavior.
Settings for CMS, notifications, and call retries.
System language, reset option, and version info.
Explains two primary methods for remote phone control.
Table detailing commands for system operations.
Notes on audio monitoring duration for GSM and PSTN.
Defines Normal, 24h, Delay, and Home zones.
Procedure for systems linked to a CMS.
Necessary steps before using SMS functions.
Illustration of user commands and panel replies.
Rules for correctly formatting SMS messages.
Sending SMS '0' to disarm the system.
Sending SMS '1' to arm the system.
Sending SMS '2' to activate Home Mode.
Sending SMS '00' to check system status.
Using SMS '5' to input phone numbers.
Using SMS '6' to input SMS notification numbers.
How SMS numbers receive RFID disarm alerts.
Using SMS '91-99' to assign zone names.
Format for low battery notifications.
Format for tamper alert notifications.
Using SMS '10' to rename RFID tags.
Using SMS '11' to set delay times.
Using SMS '12' to adjust siren settings.
Using SMS '13' to change disarm password.
Using SMS '0001' for English language.
Using SMS '0000' to restore default settings.
Arming, disarming, and Home Mode operations.
Arm/disarm without audible beeps.
Triggering alarm and notifications via SOS button.
Referencing page 10 for registration process.
Power supply, current, distance, and dimensions.
High-performance motion detection features and parts.
Internal layout and LED indications for status.
Details on tamper detection and infrared sensing.
How the detector functions and enters standby.
Steps to register the detector with the control panel.
Advice on optimal placement and angle for installation.
How to verify the motion detector's functionality.
Power, current, detection scope, dimensions.
Functionality and physical components of the contact sensor.
Internal layout and LED status indications.
Steps to register the door/window contact sensor.
Instructions for installing sensor and magnet.
Power, current, distance, dimensions for models.
Disarming system or unlocking electronic locks.
Points to page 10 for registration instructions.
How to add compatible eTiger sirens.
Solutions for unresponsive control panels.
Solutions for problems connecting accessories.
Solutions for issues with remote commands.
Solutions for problems with RFID tag disarming.
Solutions for inability to access setup menu.
Recommendations for safe product use and lifespan.
Precautions for placement, heat, and dismantling.
Information on environmental and legal compliance.
Details on manufacturing location and CE marking.
To Next Page
