EN 19
FAULTS
Problems with the hob Possible cause Solution
The burner does not burn
evenly.
Burner parts not placed
correctly.
Assemble the burner parts
using the centring ridges.
Burner parts dirty/damp. Clean/dry the burner
components. Make sure that
the outflow holes are open.
Wrong type of gas used. Check whether the gas used
is suitable for the appliance.
Contact your installer if it is not
correct.
The burner goes out after
igniting.
Control knob not pressed in
long enough.
Keep the control knob pressed
in for at least 10 seconds.
Problems with the oven Possible cause Solution
The oven does not heat up. No temperature set. Set the temperature using the
temperature knob.
A visit by a service technician during the warranty period will be
charged if the appliance is not functioning because of improper use!
To Next Page
Loading...
