GB 24
Installing
e appliance is assembled with short feet (hight 15 mm). To fit
the 380 mm high cabinet, the short feet must be replaced by the
4 longer feet, which can be found inside the package.
Unpack the appliance. Turn it over and replace the short feet with 1.
the longer feet in the accessory package.
Place the mounting frame A around the microwave and attach it 2.
using the 4 screws that were supplied.
Carefully push the microwave into the box, making sure that it is 3.
in the centre.
Open the door and screw down the microwave with the screw that 4.
was supplied.Finally, place the cap on top of the screw.
INSTALLATION Placement
A
1.
3.
2.
4.
To Next Page
Loading...
