Why does my Eton America Beamer PN2 Scooter engine idle unsteadily or stall?
An unsteady idle, stalling, or poor running condition in your Eton America Scooter engine can stem from a lean or rich fuel mixture.
General| Max Speed | 15.5 mph |
|---|---|
| Weight Capacity | 220 lbs |
| Weight | 28 lbs |
| Foldable | Yes |
| Battery | 36V/7.5Ah |
| Tires | 8.5 inches |
Essential safety precautions for handling gasoline and battery electrolyte.
Publication information, specifications, and manufacturer's rights disclaimer.
Technical details for engine type, displacement, bore, stroke, and transmission.
Dimensions, weight, and suspension types for the vehicle chassis.
Details on brake systems, tire sizes, pressure, and fluid types.
Specifications for the carburetor, spark plug, and battery.
Identifies the location of frame and engine serial numbers.
Standard torque specifications for various engine and frame fasteners.
Key specifications for maintenance tasks like spark plugs, tires, and lubrication.
Schedule outlining maintenance intervals for various vehicle components.
Procedure for inspecting fuel lines for deterioration or leaks.
Inspecting throttle lever smooth operation and cable condition.
Instructions for cleaning and maintaining the air filter element.
Guide for checking, gapping, and replacing the spark plug.
Inspects front and rear brake lever play.
Procedure for changing the transmission gear oil.
Location and function of the engine stop switch.
Detailed steps for removing the engine from the vehicle.
Steps for reinstalling the engine and checking connections.
Common fuel system issues and their potential causes.
Steps for removing the carburetor from the engine.
Detailed steps for disassembling the carburetor components.
Procedure for assembling the throttle valve component.
Common issues related to oil delivery and engine overheating.
Explanation of how the engine lubrication system operates.
Important caution regarding the correct fuel-to-oil ratio.
Procedures for disassembling, inspecting, and assembling the oil pump.
Common combustion problems like low compression, noise, and smoke.
Steps for removing the cylinder and piston from the engine.
How to inspect cylinder bore for wear and cylinder head for warping.
Procedures for installing piston rings, piston, and cylinder.
Common transmission issues like vehicle not moving or attaining speed.
Exploded view diagrams of transmission gears and CVT components.
Explanation of how power flows through the transmission system.
Details on the CVT system and how it changes ratios.
Information on the transmission box, including ratios and disassembly.
How the kick starter mechanism operates to start the engine.
Common problems related to steering, handlebars, front wheel, and brakes.
Specifications for front brake disk thickness and rim warping.
Steps for removing and installing the speedometer cable.
Instructions for replacing the handlebar assembly.
How to inspect front wheel bearings and rim.
Steps for replacing the front disk brake caliper and bleeding.
Procedures for inspecting the brake disk and brake shoes.
Common issues with rear brake performance and wheel vibration.
Specifications for rear brake drum diameter and lining thickness.
Steps for removing the rear wheel.
How to inspect the rear wheel rim for distortion.
Diagram of rear shock absorber components with torque values.
Steps for removing the front fender.
Instructions for removing various body covers and panels.
Common electrical issues like engine not starting or running poorly.
Procedure for testing the ignition coil's resistance.
Information on preprogrammed ignition advance and timing control.
Guidelines for battery removal, testing, and charging.
To Next Page
