To Next PageTo Next Page
Need help?Do you have a question about the Etymotic HD3 Safety and is the answer not in the manual?
General| Type | In-ear |
|---|---|
| Driver | Balanced Armature |
| Impedance | 16 Ohms |
| Frequency Response | 20 Hz - 16 kHz |
| Noise Isolation | 35-42 dB |
| Microphone | No |
| Connector | 3.5 mm |
Details the main HD5 Safety Earphones product.
Describes the assortment of ACCU-Fit eartips and zipper pouch.
Information about the included shirt clip accessory.
Describes the gold-plated 3.5 mm 3-conductor plug.
Details the main HD3 Safety Headset product.
Describes the assortment of ACCU-Fit eartips and zipper pouch.
Information about the cable slider accessory.
Information about the included shirt clip accessory.
Describes the 3.5 mm, 4-contact phone + stereo plug.
Details the 3-button control and microphone functionality.
Guidance on choosing eartips for comfort, sound quality, and noise isolation.
Advice on safely inserting eartips into the ear canal.
How to inspect eartips for wear and when to replace them.
Instructions on cleaning eartips and avoiding damage.
Step-by-step guide for inserting foam eartips.
Guidance on inserting 3-flange eartips, including moistening.
Proper technique for removing earphones from the ear.
How to properly store earphones to protect them.
Explains play/pause and track forward/back functions.
Instructions for answering and disconnecting calls.
Important safety warnings to prevent injury or damage.
Guidance on proper eartip fitting and potential discomfort.
Detailed attenuation data and NRR for foam eartips.
Detailed attenuation data and NRR for 3-flange eartips.
Advice on potential eartip removal issues and professional help.
When to consult an audiologist for ear-related issues.
Details the manufacturer's warranty against defects.
