EUBRIDGE F36AR - Mosquitoes in the Screen; Sunroof Does Not Close Automatically; Fan Vibration at High Speed; Remote Control Issues

/
3. The sunroof opens during
driving, allowing rainwater
from outside the vehicle to
drift into the interior of the
vehicle.
The sunroof needs to be closed
during travel.
2
Mosquitoes in
the screen
Mosquito entrapment in suction
mode
Remove the mosquito netting
to remove insects.
When in use, turn on the exhaust
air mode for a period of time, it
will suck out the mosquitoes
inside the
screen.
3
Sunroof does not
close automatically
when it
rains
The raindrop sensor is
not working.
Wipe clean the surface of
the raindrop sensor
4
Slight vibration of the
ventilation fan when
the vehicle is moving
at
high speed
The ventilation fan was not
installed tightly enough to the
vehicle and the top plate of the
vehicle opening separated from
the ventilation fan.
Wooden panels are added to
the middle of the vehicle
sandwich to allow the
ventilation fan to be securely
mounted on the vehicle.
5
The remote control
does not control the
fan
The remote control battery
is dead.
Get new remote control batteries.
6
The fan works
normally when the top
cover of the
ventilation fan is
opened. Upper cover
cannot be closed via
the control panel
The internal door control
switch wire of the ventilating
fan was misplugged into the
raindrop sensor wiring
position.
Switch the position of the door
control cable inside the
ventilation fan with the raindrop
sensor cable.
7
Manual rocker does
not work, cannot
open sunroof cover
Faulty lid-opening motor
It is recommended to contact
the manufacturer.
8
Rain drop sensor
disabled after
forced unlocking
When forced to unlock,
the program defaults to
the ventilation fan being
in an abnormal operating
state.
Press the power button to switch
off the ventilation fan and the
raindrop detection function
returns to normal.
9
Loose top cover
rattling
The top cover of the ventilation
fan does not fit tightly to the
main body.
Use the manual knob to close
to a tight fit.
We welcome good suggestions and ideas for the manufacturer during
installation and use, and will continue to improve according to customer needs in
order to provide customers with a more perfect product experience.