When the lid is closed:
pressing this button is invalid.
When the lid is open:
The first time it is pressed, it will
enter the timing setting state,
press it again within 3 seconds,
the fan will stop after 1 hour;
and press once again within 3
seconds, the fan will stop after
2 hours. In this increment, the
maximum setting will
automatically stop after 4
hours.
When it is pressed for
the first time, it enters
the timing setting state,
and the number of lights
on indicates the timing
duration.
* If the timer button is
pressed for the first time
at power-on, the
indicator light is off,
indicating that there is
no time setting.
* If there is no operation
indicator within 3
seconds, the current air
volume level will be
displayed
* If other buttons are
pressed within 3
seconds, it will exit the
timer setting mode
* During the setting
process, the number
lights of lighting on
means the time hour
setting.
When the rain sensor senses
rain, the lid cover will be closed
and the fan stops.
Long Press the button for 3
seconds to force open the lid
cover, the fan can work
continue.
Press the power button to close
the lid cover and open it again,
the rain sensor returns to
normal state.
When the rain sensor
senses rain, the fan
will automatically
stops.
When the light is on in
rainy days, press the
forced unlock button,
the light will be off.
To Next Page
Loading...