EN
011
• On walls that are made out of hard materials, such as stucco, brick, or
concrete, drill holes with a 15/64 inch (6 mm) drill bit, and then insert
the anchors provided into the holes. Use the screws provided to fix
the junction box on the wall.
1 2
4. Unscrew the bolt with a flat-head screwdriver. Connect the Neutral (blue)
/ Ground (green / green and yellow) / Live (brown) wire to the Neutral /
Ground / Live wire connector in the junction box respectively. Secure the
wires tightly to prevent wires from falling.
N
L
Neutral
Ground
Live
1 2
To Next Page
Loading...
