DRAINING AND CLEANING
11
3.Remove the water straw from the water bottle.
5.After finish water drain out, Reinstall the drain valve cap and plug.
4.Place a container under the drain valve and drain valve plug
which are located on the back panel. Remove thedrain cover
and allow the water to drain out from the water cooler. Let
the water flow into the container.
Caution: Because the hot water can reach to approximately
185F,it can cause severe burns if not handled carefuly. Please
be cautious while operating and cleaning. Before draining
out the water, please wait at least 1 hour to let the water cool
down.
To Next Page
Loading...