To Next PageTo Next Page
Need help?Do you have a question about the Eumetsat TBS-5927 and is the answer not in the manual?
General| Interface | USB 2.0 |
|---|---|
| Frequency Range | 950 MHz to 2150 MHz |
| Demodulation | QPSK, 8PSK |
| Input Level Range | -65dBm ~ -25dBm |
| Modulation Support | QPSK, 8PSK |
| FEC Support | 1/2, 2/3, 3/4, 5/6, 8/9, 9/10 |
| Power Supply | 5V/500mA Max |
| Symbol Rate | 1 to 45 MS/s |
| DiSEqC Support | DiSEqC 1.0, 1.1, 1.2, USALS |
| Symbol Rate Range | 1 to 45 MS/s |
Explains the physical connections for the TBS-5927 receiver, detailing the connectors.
Guides through the process of finding and installing the necessary Windows drivers for the TBS-5927 device.
Details the steps for downloading and installing the TBS IP Tool software.
Configures the IP Tool software with specific parameters for EUMETCast Europe Ku-Band reception.
Instructions on how to disable the High Volume Service (HVS) and receive only the Basic Service (BS).
Configures the IP Tool software with parameters for EUMETCast Africa C-Band reception.
Guides the user through downloading, unzipping, and installing the BDADataEx software.
Details how to configure the network adapter settings for BDADataEx to find its data.
Explains how to configure BDADataEx for EUMETCast reception, including automatic setup.
Configures the Tellicast application by setting the fixed IP address for data reception.
Ensures the firewall allows necessary traffic from the specified interface address.
Adjusts the Windows routing table to ensure Tellicast addresses are reached correctly.
