HYDRABEAUTY
13
1. The aqua handpiece cable can be disconnected by pushing and pulling down the cable connection button.
4. Product installation
CAUTION
Follow the instruction when connecting the cable to the device. Otherwise, it will not operate properly and cause a
device malfunction.
4.3 Handpiece disconnection
4.3.1 Aqua handpiece disconnection
1. Remove by grabbing and pulling on the cable connector.
4.3.2 Peeling handpiece disconnection
1. Fully loosen the locking screw by turning it to the left and pull out the cable connector.
4.3.3 EP handpiece disconnection
- Aqua handpiece -
Button
To Next Page