Need help?Do you have a question about the Eureka Ergonomic ERK-EDK-L and is the answer not in the manual?
General| Brand | Eureka Ergonomic |
|---|---|
| Model | ERK-EDK-L |
| Category | Indoor Furnishing |
| Language | English |
Essential safety guidelines for operating the electric height-adjustable desk to prevent injury or damage.
Crucial warnings about desk path, cord length, and compliance with instructions for preventing serious harm.
Defines the intended use, user responsibilities, and manufacturer's liability limitations for the desk.
Connect frame components and legs for initial base structure.
Secure crossbars to the leg assemblies with hardware.
Attach leg supports, paying attention to screw tightness.
Fasten main frame components using screws B and C.
Position and align the left side of the desk frame onto the legs.
Position and align the right side of the desk frame onto the legs.
Attach the left side of the desktop to the frame using screws D.
Attach the right side of the desktop to the frame using screws D.
Install the control box on the left side of the desktop using screws E.
Install the control box on the right side of the desktop using screws E.
Connect the motor cables (P8, P9) to the control box.
Connect the motor cables (P8, P9) to the control box.
Ensure machine screws contact center rails by sliding them as needed.
Ensure machine screws contact center rails by sliding them as needed.
Attach cable management clips to secure wires, ensuring no obstacles.
Attach cable management clips to secure wires, ensuring no obstacles.
Carefully turn the desk upright into its final position.
Attach decorative caps to cover screw holes on the desktop.
Adjust leveling studs on the feet for a stable, level desk.
Ensure level placement, check cord clearance, and connect to power.
Instructions for safely moving the desk, emphasizing two-person lift and proper support.
Steps to reset the desk system for common error messages or power loss.
Guidance on interpreting error codes and contacting support.
Explanation for 'Hot' display and uneven desk behavior.
To Next Page
