Need help?Do you have a question about the EURO One and is the answer not in the manual?
General| Brand | EURO |
|---|---|
| Model | One |
| Category | Security System |
| Language | English |
Explains the function and behavior of the 'Alert' lamp, indicating available information.
Describes the 'Alarm', 'Tamper', and 'Fault' lamps indicating system status.
Details the function and indicators of the 'Unset' lamp during arming/disarming.
Guides on using proximity tags to set or unset the alarm system with minimal complexity.
Emphasizes closing all doors and windows before setting the alarm for security.
Advises excluding pets and people from motion sensor coverage before arming.
Steps to take when leaving the building to correctly arm the system.
Guidance on using designated exit routes and securing the final exit door.
Explains how faults are indicated on the keypad display when turning on the system.
Steps to take to resolve system faults before attempting to set the alarm.
Describes what an interrupted exit tone signifies when leaving the premises.
Actions to take if a door is left open on the designated exit route.
How to use the agreed entry route to disarm the alarm system.
Process of keying in PIN or presenting Tag to unset the alarm.
Explains the intelligent system for setting only part of the alarm system.
Refers to manual part-setting procedures detailed on other pages.
How to activate intelligent part-setting using the keypad or tag.
How the system detects movement to set appropriate areas when occupied.
Procedure to silence an active alarm tone by entering PIN or Tag.
Explains when to call an engineer based on alert LED indications.
Explains the process of resetting the system after an alarm notification.
How to use a special anti-code to reset the system without an engineer present.
Automatic disabling of functions due to repeated intruder or tamper alarms.
Automatic disabling of keypad or tag reader for incorrect entries.
How ABCD keys can represent specific security areas or settings.
Naming the entire system or specific areas for easier identification.
How to choose specific areas to set using PIN or Tag with Flexi-Set.
The process of accepting the chosen areas for setting the system.
How Flexi-Set operates when the entry timer has started for unsetting.
Unsetting procedures when the entry timer is not running.
Always having a choice of areas to unset with the Flexi-Unset feature.
Conditions under which the Flexi-Unset feature can be enabled by the installer.
Using the 'C' key to select chime facility when the system is unset.
How to turn off the chime function by pressing the 'C' key again.
Option to ignore a deliberately left open window during setting.
Process of omitting faults for a single arming period.
How to isolate a detector if a room is occupied when leaving.
Procedure for omitting specific zones when leaving the building.
How to trigger a personal attack alert by pressing specific keys.
How to reset the personal attack function by entering PIN or Tag.
How to enter the manager menu using 'D' and PIN/Tag.
Advice on using manager menu functions when the system is disarmed.
Option to set the system's date and time via the manager menu.
Option to omit specific inputs or zones from the manager menu.
Changing PIN codes and managing access tags via the manager menu.
Accessing system logs and managing the SMS phonebook from the menu.
Performing walk tests, siren tests, and CHC communications tests.
Allowing engineer access and blocking remote set via the manager menu.
How to input the current year and month for system time.
Inputting the current day, hour, and minute for system time.
How to omit specific doors that are rarely used from system detection.
Procedure to bring omitted zones back into the system's active detection.
How to change or add user PIN codes and manage access tags.
Procedure for changing the master manager code for system administration.
Defining user authority, assigning access areas, and setting user options.
Enabling Flexi-Set for area choice and understanding default settings.
Tag assignment to readers and managing reader lists for access control.
How to review the main system event log for activity history.
Navigating logs and viewing added details for specific events.
Scrolling and selecting SMS telephone numbers for alerts.
Inputting new telephone numbers for SMS alerts and messages.
How to start the detector testing procedure to ensure functionality.
Triggering detectors and confirming all are working correctly.
How to initiate a test of the alarm siren and strobe light.
What happens during the sounder test: siren sounds, strobe flashes.
How the system sends messages to mobile phones via CHC.
Steps for testing the CHC communication link for message delivery.
Controlling the alarm system remotely via a PC connection.
Options for viewing history logs or sending diagnostic data to PC.
Enabling access for installation engineers for maintenance or programming.
Returning the engineer access setting to its default state.
Blocking remote PC control over the system's arming state.
Making the choice to block or allow remote access to the system.
Restricting dial-in access to the system for PC connection.
How to reset the system using a special anti-code without an engineer.
Functions accessible by users holding Manager codes.
Functions accessible by any user with their PIN code or Tag.
How to exit the manager menu and return to the system's normal operation mode.
Fields for recording installation company, date, and site reference.
Recording keyholder information, panel type, and software version.
A table for recording user details like name, type, areas, and access rights.
Warning to remove and store user code information securely for privacy.
Explains system's ability to send signals to ARC and SMS messages.
Clarifies responsibilities for networks and SMSC services used by the system.
To Next Page