Need help?Do you have a question about the EuroLite LED PAR-64 QCL Short and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| Beam Angle | 25° |
| Voltage | 100-240V AC, 50/60Hz |
| DMX Connection | 3-pin XLR |
| Cooling | Convection |
| Housing Material | Aluminum |
| Protection Class | IP20 |
| LED Type | Quad-color LED |
| Control | DMX |
| DMX Channels | 7 |
| Color Temperature | Variable (RGBW) |
Lists key features of the LED PAR-64 QCL Short, including LED type, modes, and controls.
Details safety and procedural requirements for mounting the device overhead, emphasizing professional installation.
Explains how to connect and use the device with DMX512 controllers, including wiring and addressing notes.
Describes synchronized control of multiple devices using a master/slave configuration.
Provides instructions for connecting the device to the power supply, including safety standards.
Explains operation without a controller, covering solid colors, internal programs, and sound control.
Details the functions of the control panel for setting modes, colors, and addresses.
Guides on selecting static color outputs using the control board interface.
Describes the built-in programs and how to use sound-activated modes.
Explains how to adjust sensitivity for sound-activated operation.
Covers DMX mode setup, including addressing and channel mode selection.
Details the process of setting the DMX start address for the fixture.
Explains how to select between 4-channel and 6-channel DMX modes.
Provides step-by-step instructions for safely replacing the device's fuse.
To Next Page