EUROM AC3501 - Operation Settings; Temperature and Speed Control; Timer and Mute Features; Compressor Protection and Smart App

33
Temperature setting
1. Use the ‘+’ and ‘-‘ buttons on the control panel or remote control to change the desired
SET temperature. The temperature range of the device is 16 °C – 28 °C.
Speed setting
1. Press the Speed button (Figure 3, pos. 2) repeatedly to set the required speed setting:
• turbo;
• normal;
• sleep.
Timer
CAUTION
The countdown timer is available in the Eurom Smart App.
At the end of the set countdown timer time the device will automatically switch off.
1. Press the Timer / Mute button (Figure 3, pos. 3) to start the countdown timer of
0h - …, 9h.
Mute
1. Press the Timer / mute button (Figure 3, pos. 3) for 3 seconds.
• The display goes dark.
• The fan speed goes to sleep setting.
• All beep noises are cancelled, except the error alarms.
Press the Timer button again for 3 seconds to deactivate mute mode.
Compressor protection function
The compressor protection function gives the compressor a 5-minute delay to protect the
device.
Eurom Smart App
TIP
When connecting for the first time, it is recommended to switch on Bluetooth.
The first connection will be easier and quicker.
CAUTION
• When the device is connected with Wi-Fi, the Wi-Fi symbol appears on
the display.
• If the Wi-Fi symbol is blinking there is no connection.