29
Technical data
Technical changes reserved
Safety Warnings
1. Before you use this machine for the first time, read the entire
operating manual carefully and then handle it according to the
instructions, warnings and safety rules.
2. Warning and instruction stickers on the machine provide important
information about using it safely.
3. Check the machine before each time you use it (including cable,
plug, hose and spray gun) for any visible damage. Check especially
the electric cable for faults or cracks. Do not use a damaged
machine or one that has not functioned properly when you used
last. Give it to your supplier for repair or replacement.
4. Never touch the plug or the socket with wet hands.
5. All current-conductive objects in the work area must be protected
against water jets.
6. The voltage and frequency stated on the machine must correspond
to those of the socket. The electrical system must be approved (IEC
60364-1) and secured with an earth leak switch (max. 30 mA).
Never make any changes to the plug or socket in order to adjust
them! Defectiveness in the electric connection could result in a
shock!
7. When using the machine, unroll the cable entirely to prevent
overheating. If an extension cable is unavoidable, use a cable of
To Next Page
Loading...
