WARNING
1. Don't place fingers or foreign objects through guards into blade,and don't let children close
the fan when the fan is running.
2. Bare-body children,weakling and elder should not stay in front of the running fan for a
long time.
3. Don't place the running fan near opened window or flower or tree or the curtain,portiere
and suchlike places,also don't place the fan in some unplaned place.
4. Close power supply before removing the fan.
5. Dawning operation, cut off the power if appear rubbing sound, rising smoke,move stopped,
send it to check and repair to maintenance station or our factory.
6.This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the applicance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
7. Type Y attachment - Damaged supply cords to be replaced by the manufacturer, service
agent or similarly qualified person to avoid hazard.
8. Don't use the three-prong plug with a two-prong socket.
9. Besides our stating maintenances, non-professional is forbidden to disassemble the fan.
10. WARNING:"ONLY INDOOR USE".
Quality Guarantee
1
、
Under normal operation,any breakdown caused by quality can be exchanged or fixed free
change within one year(base on sale date).
2
、
The product has a per manently maintenance material and repairing will be charged after
"Guarantee period".
3
、
In the following cases, guarantee is not applicable:
a.Breakdown not caused by disassembly, refitment, repair of our company.
b.Natural disaster and other wrong operation.
c.Valid without stamp of sell and tie indicater year.
MAINTENANCES
1. The fan must be cleaned periodically to keep clean and attractive.
2. Open the net ring,remove the net(1)and blade(2).Use mild detergent or alcohol to clean off
the dirt on the fan.
3. Don't web the motor during cleaning.
4. Assemble the fan after cleaning. Be sure the blade is properly fixed in the bearing, close
the four clips and fix the screw in the guard.
5. After assembling,run fan with a slim pole to ensure
well-balance and have no grating.
Notice
1. Avoid the guard and blade deformed during maintainces.
2. The power supply must be closed during the whole maintances.
To Next Page
Loading...
Need help?
General
