Need help?Do you have a question about the Eurotec ETUF-9060R and is the answer not in the manual?
Provides background information on EuroTec, its history, and its global presence.
Details the ETUF series of ultrafiltration membranes, material, and applications.
Lists detailed membrane and module specifications for the ETUF-9060R model.
Identifies and illustrates the various parts of the ETUF-9060R module.
Presents a schematic diagram of a typical ETUF system, showing equipment arrangement.
Describes essential auxiliary equipment for the ETUF system, including tanks, pumps, and air systems.
Discusses the design considerations for the skid or train that supports the UF modules.
Provides instructions and precautions for installing the ETUF modules onto the skid.
Lists and explains the key parameters to monitor during ETUF system operation.
Details the procedures for safely starting up and shutting down the ETUF system.
Explains the filtration process, including feed water introduction and filtrate channeling.
Describes the backwash stage, its purpose, and the essential steps involved.
Explains the CEB process, its procedure, and recommended chemicals for cleaning.
Details the CIP process, its duration, and chemical solution requirements.
Provides a table outlining the sequence of operations and valve states for different processes.
Details methods for checking membrane integrity and procedures for leak arrest.
Lists typical values for key operating parameters like flux, pressure, and frequency.
Lists common issues, their possible causes, and suggested remedies for ETUF system operation.
Outlines general requirements for protecting modules from damage, drying, freezing, and chemical exposure.
Provides guidance on storing new and used ETUF modules, including preservation methods.
General| Brand | Eurotec |
|---|---|
| Model | ETUF-9060R |
| Category | Water Filtration Systems |
| Language | English |
To Next Page