EasyManua.ls Logo

Evektor EV-97 EuroStar SL Microlight User Manual

Evektor EV-97 EuroStar SL Microlight
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
POH/EUR/02 Issue 5 Page 1 of 37
EV-97 EUROSTAR SL
MICROLIGHT
PILOT OPERATING HANDBOOK
POH/EUR/02

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Evektor EV-97 EuroStar SL Microlight and is the answer not in the manual?

Evektor EV-97 EuroStar SL Microlight Specifications

General IconGeneral
BrandEvektor
ModelEV-97 EuroStar SL Microlight
CategoryAircrafts
LanguageEnglish

Summary

Section 2: Limitations

2.2 Airspeed Limitations

Details airspeed limitations (VNE, VA, VFE) and their operational significance for safety.

2.4 Powerplant

Provides detailed specifications and operating limits for the Rotax 912 UL engine.

2.7 Weight and Balance Limits

Specifies maximum take-off and landing weights, fuel, and baggage limits.

2.10 Manoeuvring Load Factor

Presents the flight envelope chart showing load factors versus airspeed.

2.11 Crew and Operations

Defines crew requirements, kind of operations (Daytime VFR), and other limitations.

Section 3: Emergencies

3.2 Engine Failures

Provides checklists and procedures for engine failures during takeoff and in flight.

3.3 In-Flight Re-start

Details the procedure for attempting to restart the engine while airborne.

3.4 Smoke and Fire Procedures

Covers procedures for smoke and fire incidents on the ground, during takeoff, and in flight.

3.5 Glide

Specifies the best glide speed and flap configuration for emergency gliding.

3.6 Emergency Landings

Outlines procedures for emergency landings, referencing engine failure and precautionary landing sections.

3.7 Precautionary Landing

Describes the procedure for conducting a precautionary landing due to disorientation or poor conditions.

Section 4: Normal Operations

4.3 Pre-flight Inspection

Emphasizes the importance of pre-flight inspection and outlines key checks.

4.4 Normal Procedures

Covers standard procedures from engine starting to shutdown.

Engine Starting

Step-by-step procedure for starting the aircraft's engine, including cold and warm starts.

Engine Ground Run

Procedures for checking the engine's operation and performance on the ground.

Before Take-Off Checks

Final checks performed on the aircraft and systems before initiating takeoff.

Take-Off Procedure

Detailed steps for initiating and executing a safe takeoff.

Climb Procedure

Procedures for climbing after takeoff, including speed and trim settings.

Check Before Landing

Essential checks to perform before commencing the final landing approach.

Landing Procedure

Steps for executing a safe landing, including airspeed and touchdown technique.

Section 5: Performance

5.4 Take-off Performance

Details runway distances required for takeoff, including run and obstacle clearance.

5.5 Landing Distances

Lists landing distances required for obstacle clearance and braked landing.

Section 6: Weight and Balance

6.2 Permitted Cockpit Loads

Specifies permitted cockpit loads, including baggage and fuel, for safe operation.

Section 7: Aeroplane and Systems Description

7.8 Power Plant

Details the standard Rotax 912 UL engine and its features.

Section 8: Aeroplane Ground Handling and Maintenance

Related product manuals