We recommend setting your EarPrint
before pairing with a device for the fir time.
Bluetooth Pairing
If your device is already ON, Press and hold the
white EVEN button to turn it o.
Then, press and HOLD the EVEN button for a few
seconds till Sarah, EVEN’s voice assiant, says:
“I’m looking for something to pair to”
and the LED indicator flashes Red and Blue.
Turn on Bluetooth on the target device.
Search for “EVEN H4” and pair.
If prompted, enter the password “0000”.
Once connected, Sarah will say: “Yes, connected!”
and the LED indicator will flash green.
EVEN App
Download the EVEN EarPrint
App to explore how you hear and
manage multiple EarPrints for
your EVEN H4 Headphones.
Get the EVEN App free from the
App Store.
Specifications
Warranty, Troubleshooting and FAQs
Great music las.
Your EVEN H4 headphones come with a one-year warranty.
Visit www.weareeven.com for full warranty and terms
of service details, troubleshooting and answers to FAQs.
Type
Over-Ear
Eective Range
10 meters (30 feet)
Battery
Lithium Ion,
20 hours continuous use
Power
USB-C Port
Weight
10.6 oz
300 Grams
Materials
Plaic and PU leather
Wire option
3.5mm connector
Drivers
Beryllium, Dynamic 40mm
Impedance
32 ohms
Frequency Range
20-20,000 HZ
Total Harmonic diortion
<3%
Sound Pressure Level
110+/-2dB
Microphone
Controls
Play/Pause/Call Control, Volume Up,
Volume Down, EarPrint On/O
Rechargeable Li-ion Battery
Model: AEC532339 (1ICP6/23/39)
Rated Capacity: 500 mAh/1.85 Wh
Rated Voltage: 3.7Vdc
Limited Charging Voltage: 4.2 V
Wires: Red (+), Blue (NTC), Black (—)
Apower Electronics Co., Ltd.
Made in China, May 2019
CAUTION
Do not disassemble or modify
Do not short-circuit
Do not dispose of in fire
Do not expose to high temperature
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
Owner Guide
H4
Power
The EVEN H4s come partially charged out of the box.
We recommend charging them fully prior to fir-time use.
Charging is simple.
Insert the USB-C end of the charging cable into the port.
Insert the USB end into any andard USB power source.
Charging time: 1.5 hours
Working battery life: 20 hours
Red light - Charging
Green light - Charged
Red+ Green light - (alternating) = Low battery
Power saving mode is activated after 5 minutes of
inactivity when paired, and 3 minutes when not paired.
Get to know your LED indicators
Green light -
On (with EarPrint)
Red light (flashing) -
Switching O
Green light (flashing) -
On (with EarPrint O)
Red + blue light -
(alternating) Pairing Mode
Blue light -
EarPrint Setting Mode
Red+ Green light - (alternating) - Low battery
Red light -
Charging
Fit
Music is your comfort zone.
With our adaptive EarPrint technology and adjuable
design, your EVEN H4 headphones are tailored for
personalized liening.
Know your left from right.
Both headphone cups provide output cuomized to
their respective ears. Always place the cup with the
controls over your left ear.
Lien in comfort.
Adju the headband sliders so that the cushioned cups
are over your ears.
It’s easy to set your EarPrint
Perfect sound is music to your ears.
Your
EVEN H4
Headphones include a built-in hearing
te and
proprietary software that adjus sound to your
unique hearing profile.
Enter EarPrint setup mode.
Press + hold the EVEN button for a few seconds to turn on
your headphones.
Double press the EVEN button to enter EarPrint setup mode.
Lien for the short welcome from Sarah, EVEN’s voice
assiant,
then follow the prompts.
Setting your EarPrint.
We’ll play 8 short pieces of music into your
right ear, then 8 into your left.
The te will art with silence and will
gradually increase in volume.
Ju press the
EVEN
button when you
hear music, even if it’s very faint.
Hear the dierence by using the
EVEN
button to turn your EarPrint on and o.
You can repeat the process as many times
as you like. You can also ore multiple
EarPrints using the Even EarPrint App.
Passive (without battery)
Standard USBUSB-C
USB-C Port
The music never ops.
If your battery runs low, switch
to passive mode until you can
recharge.
Plugging in.
Plug in one end of the 3.5mm
cable into the jack located on the
left ear cup. Insert the other plug
into your music device.
New EarPrint
Current EarPrint in use
EditMy Earprint
H4 Paired
EVEN Button
L
R
S
of
t
N
o
r
m
a
l
L
o
u
d