45
Remove locking clip from vehicle seat belt when not
used with a child restraint, or the vehicle seat belt will
not properly restrain an adult or child.
WARNING!
DEATH or SERIOUS
INJURY can occur.
4
5
While holding the belts and
buckle tongue, thread the
locking clip onto the seat
belt, and slide it into place.
Buckle the seat belt with the
locking clip in place.
• If using a vehicle seat
belt and installing the
convenience base only,
return to page 23, Step 1.
• If using a vehicle seat belt
and installing the carrier
with no base, return to
page 31, Step 3.
13 mm
(0.5 in.)
Using a Locking Clip
Note: Locking clip must be
placed within 13 mm (0.5
in.) of seat belt buckle.
To Next Page
Loading...
