5
Using the Side-entry Buckle
To fasten the side-entry buckle
Holding the buckle handle A parallel to your body, as shown, place it
in the holder B and slide it downward. As you slide the handle, it will
rotate away from your body. Keep sliding it downward until it locks into
position with an audible click.
1
2
Important: Check that the handle A is locked
properly in position by feeling for the handle tip C
at the bottom of the holder, as shown.
If you can’t feel the tip, push the handle downward
until you do.
A
A
B
A
C
A
To Next Page
Loading...
