Evenflo Embrace - Replacement Instructions Manual

Embrace™ Handle Trigger
Replacement Instructions
1. Place and lock the handle in its lowest position then place the child restraint upside down with the handle pointing
to the left, as shown.
Handle
➚
1
3. Hold the handle securely and pry up
and out on the bottom of the trigger
until it pops free from the handle.
Note: You might have to use
some force to pop the trigger free.
2. Squeeze the left trigger (on your near
side) of the Embrace
™
. Insert the hooked
tip of the removal tool (supplied)
beneath the bottom of the left trigger,
as shown.
4. Remove the left trigger from the handle
and discard immediately.
Note: Do not remove the right trigger
at this time.
➚
Left Trigger
2
3
4
Left Trigger
Para instrucciones en Español, llamar al: 1-800-233-5921.
Fasteners (4)
Left Trigger (1)
2505-23
Right Trigger (1)
2505-24
Removal Tool (1)
2505-23
2505-2
4
Kit Contents:
Fasteners (4)
Left Trigger (1)
2505-23
Right Trigger (1)
2505-24
Removal Tool (1)
2505-23
2505-2
4
Left Trigger
Right Trigger
Left Trigger
Handle
Left Trigger
Handle
Handle
Removal
Tool
➚
Handle
Removal Tool (1)
Fasteners (4)
Left Trigger (1)
2505-23
Right Trigger (1)
2505-24