6
The following cleaning procedures should be
performed daily or when the device is being used
regularly. Failure to properly clean your unit may
result in clogging and shortened device life.
1. Carefully separate the silicone tip from the
collection cup.
2. Unscrew the collection cup from the device
main body.
3. Silicone tip and collection cup should be rinsed
well with hot water after each use to prevent
mucus from drying and clogging unit.
4. To Clean (at the end of the day / as needed):
Wash the collection cup and silicone tip with
mild, non-abrasive soap and water.
5. Disinfecting (after an illness / as needed):
After cleaning the pieces, rinse the tip and
collection cup thoroughly with hot water.
6. Do not wash or immerse the main body of the
aspirator. Use a soft, dry cloth to wipe Nasal
Aspirator. Never use abrasive cleaning agents
or any industrial strength cleaners.
7. Do not expose the device to extreme
temperatures, very high humidity, or direct
sunlight.
8. Avoid dropping the device.
9. Allow all parts to dry completely before
reassembly.
NOTE:
• Protect the Nasal Aspirator from drops or
heavy impact.
• Store in an area away from sunlight, dust
and humidity.
• If tips degrade or get damaged, please
replace them.
Cleaning and Disinfecting
To Next Page
Loading...