Do you have a question about the Event electronics Biamplified Direct Field Monitor System and is the answer not in the manual?
Brand | Event electronics |
---|---|
Model | Biamplified Direct Field Monitor System |
Category | Portable Speakers |
Language | English |
Instructions for safely unpacking and checking the speakers, emphasizing the preservation of original packaging for returns.
Guidance on positioning speakers for optimal stereo reproduction using an equal triangle setup.
Details on the balanced XLR input connector, supporting both balanced and unbalanced operation.
Information on the 1/4" input, accommodating balanced/unbalanced signals and pin configuration.
Description of the unbalanced RCA input and recommendations against mixing with balanced inputs.
Explanation of the input sensitivity adjustment for signal level compensation and distortion prevention.
Details on the power switch and AC line cord connector for operating the unit.
Specifications for the low frequency driver, including size and cone material.
Specifications for the high frequency driver, including size and diaphragm material.
Details on the frequency response range and tolerance for different models.
Information on the crossover frequency and type for each model.
Maximum Sound Pressure Level (SPL) ratings for each model.
Noise floor specification relative to full output.
Types of input connectors supported and their signal handling.
Description of the polarity convention for low frequency cone displacement.
Input impedance values for balanced and unbalanced connections.
Specifies input voltage required for full output at maximum sensitivity.
The adjustable range of the input sensitivity control.
List of built-in protection circuits for the amplifier and speaker.
Description of the front panel indicators, such as the power LED.
Electrical power requirements, including voltage, frequency, and consumption.
Details about the cabinet material and internal insulation.
Physical dimensions (width, height, depth) for each model.
Weight specifications for each model.