EasyManua.ls Logo

Everfine EMS61000-5A User Manual

Everfine EMS61000-5A
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EMS61000-5A
SURGE GENERATOR
USER’S MANUAL
Ver 6.03
EVERFINE Corporation (Stock Code: 300306)
ADD Bldg.1 #669 Binkang Rd., Binjiang Hi-Tech
Zone, Hangzhou310053, China
Tel
86-571-86698333
Fax 86-571-86696433
E-mailGlobal@everfine.net
Globalservice@everfine.net
http//www.everfine.net
Copyright © EVERFINE, Copy or spread without authorization is prohibited.
Question and Answer IconNeed help?

Do you have a question about the Everfine EMS61000-5A and is the answer not in the manual?

Everfine EMS61000-5A Specifications

General IconGeneral
CategoryPortable Generator
ModelEMS61000-5A
Rated Power5000W
Max Power5500W
Displacement389cc
Fuel TypeGasoline
Fuel Tank Capacity25L
Starting SystemRecoil/Electric
DC Output12V/8.3A
Outlet1 x DC outlet

Summary

Foreword

Checking package contents

Procedure to verify instrument and accessories upon receipt.

Warm notice to valued customers of EVERFINE

Feedback request for quality improvement and customer satisfaction.

Copyright Statement

Safety Precautions

Warning

General Operating Warnings

Safety warnings for operation in hazardous environments and proper grounding.

Cautions

General Operating Cautions

Safety cautions for instrument use, wiring, and maintenance.

Chapter 1: Overviews

Main Characteristics of the Instrument

Key features and capabilities of the surge generator.

Chapter 2: Specifications

Technical Indicators and Standards

Detailed specifications, technical indicators, and conventional indexes.

Output Waveform Definitions

Explains 1.2/50µs and pulse magnetic field waveforms.

Chapter 3: Panel Shows

Front Panel Overview

Description and labeling of the instrument's front panel components.

Rear Panel Overview

Description and labeling of the instrument's rear panel connectors and ports.

Chapter 4: Parameter Settings

Interface and Parameter Setting

General guidance on navigating the interface and setting parameters.

System Settings and Configuration

Configuration options for general use, network, language, and administration.

Test Step Setup and Editing

Creating, editing, and managing test steps and their parameters.

Parameter Configuration and Modes

Detailed settings for voltage, phase, impedance, cruise modes, and triggers.

Display, Control, and Error Handling

Dynamic display, operation controls, time, communication, and troubleshooting.

Chapter 5: Operating Steps

Preparatory Work and Connections

Steps for instrument preparation and connecting test wires.

Power On, Parameter Setup, and Start

Procedures for powering on, setting parameters, and initiating tests.

Test Execution and Termination

Handling errors, terminating tests, and concluding experiments.

Chapter 6: Inspection of Instruments

Inspection Standards, Equipment, and Environment

Relevant standards, auxiliary equipment, and environmental conditions for inspection.

Voltage Waveform Inspection Tests

Procedures for testing voltage waveforms in direct and coupled modes.

Short Circuit Current Inspection Tests

Procedures for testing short circuit currents in CWG and coupled modes.