If you are not selecting any cooking zone
3. When the indicator stops flashing, touch the timer key(F)
timer will flash “10”.
and the
4. Set the time by touching the “-“ or ”+” control of the timer
Hint: Touch the “-“ or ”+” control of the timer once to decrease or increase
by
1 minute.
Touch and hold the “-“or ”+” control of the timer to decrease or increase
by 10 minutes.
Touching the “-“ and ”+” together, the timer is cancelled, and the timer
indicator will turn off.
1. Make sure at least one cooking is turned on.
Note: you can use the minute minder even if you’re not selecting any cooking
zone.
2.
Select the cooking zone using (A) and the power level required.
5. When the time is set, it will begin to count down immediately. The display will
show the remaining time .
6. Buzzer will bips for 30 seconds and the timer indicator will turn off when the
setting time finished.
To Next Page
Loading...