061621
Charge
Engine
Start
Battery
Voltage
Alternator
Check
Battery
Recond
BATTERY CHARGE
BC50BE
QUICK START GUIDE
THIS QUICK START GUIDE IS NOT A SUBSTITUTE FOR THE INSTRUCTION MANUAL.
PLEASE REFER TO THE INSTRUCTION MANUAL AND YOUR VEHICLE’S USER’S MANUAL BEFORE USE.
IF YOU HAVE ANY QUESTIONS, CALL CUSTOMER SERVICE AT 1-877-571-2391
MODE SELECTION
CONTROL PANEL
OVERHEAT
ALARM
BATTERY RECONDITION
INDICATOR
SURROUNDINGS
LOW TEMP
SURROUNDINGS
HIGH TEMP
ALTERNATOR
CHECK
BATTERY
BATTERY RECONDITION
AMP/VOLTS/SEC
INDICATOR
DIGITAL
DISPLAY
Varies according to
selected function
BATTERY CLAMPS/FAULT
BATTERY
CHARGE GAUGE
ENGINE
START ICON
© 2021 Baccus Global, LLC.
Press once to start
charging your battery
Shows status and function
info with easy to read Icons
To easily select
desired function
LCD SCREEN
ICON SOLID FLASHING
Unit is fully
charged
Ready to
Jump-start
Alternator
Check
Activated
Engine
Start
Activated
Alternator
Check Completed
Unit is charging
Reverse Polarity
connection
Battery
Recondition
ALTERNATOR CHECK
ENGINE START
REVERSE POLARITY ALARM
When battery clamps are connected in reverse polarity, an audible alarm (continuous beep) will sound and the LCD screen will display the Reverse Polarity
Indicator icon (please see Instruction Manual for details).
DO NOT activate the unit. If this happens carefully disconnect the clamps and re-connect with the proper polarity. Ensure that the grounded clamp has a firm
and clean connection.
BATTERY CHARGE
Once clamps are correctly connected, press to start charging. NOTE: this unit is a high-frequency smart charger. It will need to sense baseline voltage in
your battery in order to engage charging mode. If it does not sense sufficient voltage, it will enter reconditioning mode.
This unit is equipped with an Engine Start function that delivers concentrated, high amperage charging for a 40-second period to start your vehicle. This is
NOT a jump-starting function. After engaging the unit will display a timer. Once the timer has elapsed, you may try to start your vehicle.
Press to engage the alternator check process, which is designed to determine the functionality of your vehicle’s internal electrical system. Please consult
Instruction Manual for full details on how to complete this process.
BATTERY RECONDITION
Press to engage a 24-hour battery reconditioning cycle. This cycle will subject your battery to intermittent high-frequency pulses in order to reduce the
effects of corrosion and recondition your battery. This is NOT guaranteed to ensure charging. If your battery does not charge after one reconditioning cycle,
discontinue charging.
Consult the TROUBLESHOOTING section
of your manual for further info.
Need help?
General
