100
ENGINE MANAGEMENT MODULE (EMM)
DIAGNOSTIC SOFTWARE FUNCTIONS
Fuel Injector Servicing
All E-TEC fuel injectors use software program-
ming to compensate for variations in fuel flow.
Each injector and its location on the outboard is
identified by the EMM. DO NOT install an injector
without updating the compensation software.
To install a service injector, click the “Replace”
button on the Injector Coefficients screen and
select the file for the replacement injector. Refer
to Fuel Injector Service on p. 169.
Reports
Engine reports provide service records and can
be used to document the running history of an out-
board. Reviewing this information can help iden-
tify or resolve some service issues.
Click the print button in a window of the diagnos-
tics software to print engine data, or to export the
information to a computer file.
005157
1. Print button
2. Print/Export options
006639
Engine Report data files 006640
1
2
To Next Page
Loading...
Need help?
General
