EN
Assembling the base frame
1. Reach into the folded bicycle trailer and pull the handlebar.
2. Pass the frame part to which the handlebar is attached under the linkage of the frame. Note: The
angle of the handlebar can be adjusted by pressing both buttons simultaneously.
3. Connect the frame part to which the handlebar is attached to the frame of the bicycle trailer using
the black fastening hooks.
4. Secure the black fastening hooks by turning the locks until they engage.
5. The parts are correctly connected to each other when the connection looks like in picture 5, the
textile cover is taut and nothing wobbles. Note: Secure the textile cover by folding it over the frame
and closing the Velcro fastener.
1.
4.
2.
3.
3.
5.
To Next Page
Loading...