EN
Attaching the rear wheels
Insert the rear wheels into the openings on the frame. When you hear a click, the rear wheels
an be removed by pressing the
button located in the middle of the wheel.
Warning! After assembly, check the locking by pulling both wheels back and forth! The wheels
must not be able to be pulled out without pressing the button. Wheels that are not fully locked
can come loose when riding, which can lead to accidents with life-threatening injuries. 2.
Note: The bicycle trailer has a wheel guard. Always fold the wheel guard outwards when using
it as a bicycle trailer. The wheel guard protects the rear wheels from collision.
ATTENTION!
THE CORRECT TIRES ARE ESSENTIAL! USE ONLY THE SUPPLIED TIRES AND KEEP THEM
PROPERLY MAINTAINED. INFLATE TIRES TO 30-35 P.S.I. AND CHECK PRESSURE BEFORE
EACH USE. DO NOT USE HIGHER PRESSURE TIRES AS THIS WILL MAKE
THE TRAILER JUMPY
AND PRONE TO TIPPING OVER WHEN LIGHTLY LOADED. WE RECOMMEND ONLY TIRES WITH
ROAD TREAD. DO NOT USE OFF-ROAD TIRES.
1. 1. 2.
NOTICE.
The wheel guard
protects the wheels
from collisions with
obstacles
To Next Page
Loading...