EN
Attaching the drawbar
2. Secure the drawbar with the clamp. To do this, insert both steel bolts of the clamp into the holes
on the side of the bicycle trailer and close the clamp. The clamp is securely closed as soon as you
hear a loud clack.
Note: Opening and closing the clamp is not smooth and requires a certain amount of force. This is
necessary to guarantee a secure hold of the clamp.
3. The drawbar must always be mounted on the left side of the bicycle trailer. The drawbar must not be
mounted on the right side.
ATTENTION!
Both steel bolts must always be locked
with the clamp when the trailer is used.
Always make sure that the drawbar is
securely mounted. Failure to do so may
result in serious accidents and injuries.
1.
3.
2.
To Next Page
Loading...