What to do if my Evocare EcoStar 530 F-M Dishwasher signals a shortage of detergent?
If your Evocare Dishwasher signals a shortage of detergent when ready for operation, it indicates that you need to add more detergent.
What to do if my Evocare Dishwasher signals a shortage of rinse aid?
If the Evocare Dishwasher is ready for operation and signals a shortage of rinse agent, it means the rinse aid needs to be refilled.
Why is the emergency program active and washing restricted on my Evocare EcoStar 530 F-M?
The emergency program may be active, restricting washing, because there is no boiler or tank heating. Check the system to resolve this issue.
What to do if regeneration is necessary for my Evocare EcoStar 530 F-M?
If regeneration is necessary, the user must start the regeneration process by emptying the tank and adding salt.
What to do if my Evocare Dishwasher asks for factory setting parameter list?
To address the factory setting parameter list, switch the power supply OFF and then ON within 5 minutes. Then, set the parameters back to the factory settings.
General| Brand | Evocare |
|---|---|
| Model | EcoStar 530 F-M |
| Category | Dishwasher |
| Language | English |
Instructions for storing the operating manual.
Contact details for MEIKO and its Australian distributor.
Details for machine identification (Type, SN).
Description of warning symbols used in the manual.
Specifies the machine's intended application and limitations.
Operator obligations for safe operation and maintenance.
Key safety precautions for operating and maintaining the machine.
Safety guidelines for electrical work on the appliance.
Procedures for checking delivery and reporting damage.
Guidelines for safe handling, transport, and installation.
Requirements for the environment and site setup.
Specifications for safe electrical hook-up.
Specifications for the clean water supply connection.
Guidelines for connecting the wastewater drain.
Procedure for emergency shutdown.
Information on suitable detergents and rinse aids.
Guidance on recycling packaging components.
Steps and safety measures for initial setup by qualified personnel.
Overview and function of the machine's control panel.
Steps required before starting a wash cycle.
Instructions for manually adding detergent.
Explanation of automatic detergent and rinse aid dispensing.
Guidelines for loading baskets and operating the machine.
Procedure for initiating a wash cycle.
Steps for unloading the machine after a cycle.
General advice for maintaining the appliance's function and hygiene.
Procedure for refilling the external detergent container.
Procedure for refilling the external rinse aid container.
Instructions for cleaning the machine's components.
Guidance on cleaning and maintaining stainless steel parts.
Procedure for removing lime scale deposits.
Information on the water softener's capacity and regeneration.
How to adjust water hardness settings.
Graph showing softener capacity vs. water hardness.
Procedure for regenerating the water softener.
Disclaimer regarding operator faults and unauthorized modifications.
Overview of the machine's type and design.
Specifies the machine's basket type.
Explanation of the washing and rinsing process.
Explanation of the A0 disinfection control system.
Explanation of the Thermolabel disinfection control.
Details on automatic detergent dispensing.
Details on automatic rinse aid dispensing.
Information on the Airbox AktivAir function.
Specification of the work place noise level.
Reference to technical sheet for electrical/hydraulic data.
Reference to technical sheet for dimensions and installation.
Guide to using the control panel buttons for programming.
Procedure for entering access codes to modify settings.
Accessing service parameters and functions.
Instructions for viewing and changing machine parameters.
Procedure to vent the rinse aid hose.
Procedure to vent the detergent hose.
How to reset the depletion display for cartridges.
Procedure for filling the boiler after maintenance.
Accessing configuration parameters and input/output status.
Detailed guide to viewing/modifying parameters.
How to check the status of digital and analog inputs.
How to check and modify output statuses.
Accessing dosing technology parameters.
Comprehensive list of configurable parameters and their settings.
List mapping inputs and outputs to their functions.
Table of rinse program settings and wash times.
How to interpret and clear information codes.
Explanation of error codes and their possible causes.
Safety precautions before performing maintenance.
Checks required after maintenance before restarting.
Compliance with environmental rules during maintenance.
Maintenance of dosing units and changing products.
Scheduled maintenance tasks and procedures.
To Next Page