Need help?Do you have a question about the EVoCharge iEVSE and is the answer not in the manual?
General| Mounting Type | Wall or Pedestal Mount |
|---|---|
| Input Voltage | 208-240 VAC |
| Connector Type | SAE J1772 |
| Operating Temperature | -22°F to 122°F (-30°C to 50°C) |
| Enclosure Rating | NEMA 4 |
| Protocols | OCPP 1.6 |
| Charging Levels | Level 2 |
| Wi-Fi Enabled | Yes |
| Product Type | Electric Vehicle Charger |
| Maximum Output Current | 32A |
| Network Connectivity | Wi-Fi, Ethernet |
| Cable Length | 18 ft or 25 ft |
| Weight | 12 lbs (5.4 kg) |
Explains safety symbols and provides general safety instructions for installation and use of the EVSE.
Covers precautions for general electrical safety, grounding, and avoiding live parts to prevent electric shock.
Specifies that the equipment is for vehicles not requiring ventilation during charging, advising to check the owner's manual.
Details steps to connect a laptop or mobile phone to the EVSE's unique Wi-Fi signal using its serial number.
Explains how to enter the network security key, correlating to the EVSE's unique serial number, to establish a connection.
Instructions on accessing the EVOCHARGE Web Portal via a web browser using a specific IP address (192.168.100.1).
Provides the default username ('admin') and password ('EVO32iEVSE') for administrator access to the web portal.
Lists the main menu options available on the EVOCHARGE Web Portal after logging in.
Details how to configure Wi-Fi settings by scanning for SSIDs, selecting a network, and entering the password.
Explains the final step of applying the Wi-Fi configuration and confirms successful connection via an icon on the EVSE display.
To Next Page