EasyManua.ls Logo

EVOLV CORSA - Power Switch and Speed Control; Lights and Indicator Controls; Power Indication and Dual Motors

EVOLV CORSA
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Power Switch
Turn the key to unlock and turn on the LCD screen. The electric vehicle will
automatically turn off after 2 minutes, if not in operation.
Speed Control
The speed mode can be changed by switching through 1, 2, 3 speed levels.
L1 - Low Speed
L2 - Medium Speed
L3 - High Speed
Lights Control
Toggle the ON / OFF switch to turn on or off the headlights and tail lights.
The taillights will ash automatically when braking.
Push the LEFT / RIGHT switch to signal left or right turn signal lights.
Power Indication
The number of bars estimates the remaining power of the lithium battery.
Note: Recharge when there is only one bar because emptying the scooter of power
(zero bars) is damaging to the battery over time.
Dual Motors
Press the SINGLE / DUAL button to engage the second motor in the front wheel.
Note: It’s good practice to press the SINGLE / DUAL button when riding and in motion.
Avoid starting in dual motor mode from a standstill.
Please nd throttle settings at evolvrides.com
Dashboard Instructions

Related product manuals