16
EVONIC - 104 INSTRUCTION MANUAL ISS. 12EVONIC - 104 INSTRUCTION MANUAL ISS. 12
Before installing the appliance please read and take into account the following important
requirements;
• Consult a qualified professional to check the structure of the installation site.
• This appliance has been designed to be installed into either a stud and plasterboard
wall, or an existing chimney breast.
• If installing into an existing chimney, make sure to adequately block off the flue.
• The appliance must never be installed immediately in front of an electrical socket.
• The appliance must not be installed anywhere that it may come into contact with water,
i.e. a bathroom.
INSTALLATION REQUIREMENTS
INSTALLATION
TOOLS REQUIRED
• Tape Measure
• Pencil
• Spirit Level
CHECKS BEFORE INSTALLATION
We recommend turning on the appliance before installation, connect the appliance to a
power source using the provided electrical lead, and press the right side of the rocker
switch.
• Screwdriver
• PZ2 Screw Bit
• Screws (Supplied)
Power Inlet
Rocker Switch
To Next Page
Loading...