EVS XS - Page 39

Video and Codecs
The codecs modules allow connections for recording and playback of video material.
Each connector on a codec module is connected to the corresponding J connector on the
COD A or COD B module of a V3X board.
Please refer to the See "V3X Video and Reference Boards" on page 64 for more details on
each connector specific usage according to the different configurations.
The following video and codecs connectors layouts are available according to your
configuration:
Config Layout Description
222 2 channels version
444 4 channels version
666 6 channels version
Analog and Digital Audio
The analog audio inputs and outputs are available on multi-pin (DB15) or on XLR
connectors for audio signals input and output in analog format.
The digital audio inputs and outputs are available on BNC or on XLR connectors for audio
signals input and output in digital format.
Please refer to the See "Analog Audio DB15 Pinout" on page 46 for more details on the
connectors pinout according to the different configurations.
34 5. Hardware Installation and Cabling
EVS Broadcast Equipment S.A. -November 2011 Issue 11.00.A