EVS XS - Connectors on the COD a and COD B Modules

Issue
10.03.B
XS Series DISK RECORDER
–
Version 10.03
- Hardware Technical Reference
EVS Broadcast Equipment SA
–
March 2010
50
CONNECTORS ON THE COD A AND COD B MODULES
Connector SD mode HD mode
Connector label on
rear panel
J1 SDI/CVBS (*)
monitoring output (SD)
SDI/CVBS(*) monitoring
output (SD, down-
converted)
Character Outs,
CVBS/SDI
J2 SDI monitoring output
(SD)
SDI monitoring output
(SD, down-converted)
Used for multiviewer
input
J3 Loop-through for the SDI
input signal (SD)
SDI program output
(SD, down-converted)
SD Out
J4 SDI monitoring output
(SD)
HD SDI monitoring
output (HD)
Character Outs, SD/HD
J5 Not installed Not installed n.a.
J6 SDI program output
(SD)
HD SDI program output
(HD)
SD/HD Out
J7 SDI program output
(SD, identical to J6)
HD SDI program output
(HD, identical to J6)
SD/HD Out
J8 SDI input
(SD)
HD SDI input
(HD)
SD/HD In
J9 Alternate SDI input
(SD, for hardware loop)
Alternate HD SDI input
(HD, for hardware loop)
Used for loop in
(*) The switch between SDI and CVBS on J1 is done by a software setting in the
EVS Configuration menu.