4
HOW TO OPERATE
Starting your new Refrigerator
1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the
interior with a clean moist cloth.
2. Insert the power supply cord into the socket.
Temperature control
Defrosting
You will never have to defrost your refrigerator as it is designed to do it
automatically. The defrosted water drains into the evaporator tray located in
the backside.
NOTE: Wait 3-5 minutes before restarting if you unplug the refrigerator.
The unit may fail to operate properly if restarted too quickly.
3
MIN When ambient Temp. is below 15˚C or 59 ˚F
MED When ambient Temp. is between 15-25˚C or 59-77˚F
MAX When ambient Temp. is above 25˚C or 77˚F
WINTER If ambient temperature is below 10˚C or 50˚F
• To control the internal temperature, adjust the control dial according to the ambient
temperature or purpose of use.
• The first time you turn the unit on, set the temperature control to “MAX”.
•
The range of the temperature control is from position “MIN” the warmest to “WINTER” the
coldest. After 24 to 48 hours, adjust the temperature control to the setting that best suits your
needs. The setting of “MED” should be correct for home or office refrigerator use.
“Winter” Position: Select the “WINTER” Position when the temperature in the area
where the appliance is located is colder than 10˚C or 50˚F. This enables the freezer
section to operate properly.
To Next Page
Loading...