OS3030 Measurement and function displays
INFO displays
8
Rinse after production
R i n s e . a . p
r o d u c t .
5 s 1 0 s 3 0 0 s
The times input in programming steps 13.2,
13.4 and 13.6 are displayed: rinse after pro-
duction.
Rinse during standby
R i n s e . d . S
t a n d b
y
2 4 h 1 6 0 m 3 0 0 s
The following settings are displayed for rinse
during standby:
1. The rinse interval entered in programming
step 14.2.
2. The time remaining until the rinse phase is
activated.
3. The sum of the rinse times from program-
ming steps 14.3, 14.5 and 14.7. Alternatively,
the remaining rinse time is displayed during the
rinse phase.
Rinse during production
R i n s e . d . p
r o d u c t .
8 h 4 8 0 m 3 0 0 s
The following settings are displayed for rinse
during production:
1. The rinse interval entered in programming
step 15.2.
2. The time remaining until the rinse phase is
activated.
3. The sum of the rinse times from program-
ming steps 15.3, 15.5 and 15.7. Alternatively,
the remaining rinse time is displayed during the
rinse phase.
Cell constant and temperature
C
e l l c o
n
s t . / T e m
p
.
1 . 0 0 / c m 2 5 ° C
The cell constant entered in programming step
1.1 is displayed, together with the water tem-
perature entered in programming step 2.1.
Maintenance interval
M
a
i n
t e n
. i n t e r v a l
5 0 0 h
1 0 h
The following values are displayed for mainte-
nance work:
1. The maintenance interval entered in pro-
gramming step 16.6.
2. The time remaining until the next mainte-
nance.
To Next Page
Loading...