4.2-8
www.EWSWATER.com office: 702-256-8182 (m-f; 8:30-4:30, pst) fax: 702-256-3744 customerservice@ewswater.com
EWS/CWL-1035 LTD, EWS/CWL-1054, EWS/CWL-1354
Service Line Size: 3/4” - 1”; Service Flow Rate: 15 gpm
Drain Line Size: min: 1/2”
(see drain connection for proper specifications)
Installed Dimensions:
See diagrams for specific units
Dry Weight: 1035 - 80lbs, 1054 - 125lbs, 1354 - 165lbs.
Plumbing Clearances:
Minimum of 18” from front of unit to back wall for plumbing
Drain Flow:
restricted up to 4 gpm (1035, 1054), up to 7 gpm (1354)
Factory Set: maximum of 18 minutes every 3rd day
Bypass and male threaded 1” MNPT yoke (included)
Required to be installed with valve
overall
height
63”
drain
line
57 1/2”
on
center
**CWL/EWS-1354 has a grey tank adaptor
that allows for installation of valve on 13x54
tank and adds 1/2” Due to tank and base
variances overall dimensions +/- 1”
Set-Up and Installation Schematic for the following Units:
EWS-1035 LTD, EWS-1054, EWS-1354; CWL-1035 LTD, CWL-1054, CWL-1354
overall
height
62 1/2”
water
inlet/outlet
56 1/4”
on center
water
inlet/outlet
56 3/4”
on center
inlet
side:
supply
from
main
right
top
view:
outlet
side:
to the
home
filtered
left
front: valve face
back of valve:
2”cc
drain
line
58”
on
center
EWS/CWL-1054
EWS/CWL-1354**
EWS & CWL 1035, 1054, 1354
drain
line
38 3/4”
on
center
overall
height
44”
water
inlet/outlet
37 1/2”
on center
EWS/CWL-1035 LTD
10”
10”
13”
Yoke
Dual-Port
Bypass Valve
Dual Male
Connectors
Drain
Port
To Next Page
Loading...