Notes on attaching the gutter downspout:
Use a small self-tapping screw to attach the plastic
gutter down spout to the gutter profile and also the
down pipe to the plastic downspout (Shown
below)
Note: The gutter down
pipe is attached to the
base of the greenhouse
with a screw that goes
through the back of the
elbow. First, drill a small
hole in the back of the
elbow and then a small
hole in the frame of the
greenhouse for the screw
to thread into. Run the
screw through the hole on
the inside of the elbow and
into the greenhouse base.
To Next Page
Loading...
