Seed Tray (Optional Accessory)
1 Support for
every 10 foot
section
1. Assemble three sides of the seed tray.
Note: Make sure to slide 1 bolt into the
bottom of the front and back seed tray
profiles.(2 for a Vi34)
2. Slide the shelving inserts in from the
open end.
You will need aproximately:
11 3/4 for a Vi23
18 1/2 for a Vi34
Note: The last shelving insert will need
to be trimmed to fit.
3. Install the 4th side.
To Next Page
Loading...
