4
Declaration of Conformity
We declare under our sole responsibility that the products described under “Technical Data” arein
conformity with the following standards or standardization documents: EN60745-1, EN60745-2-5,
EN55014-1, EN 55014-2, EN61000-3-2, EN61000-3-3 according to the provisions of thedirectives
2004/108/EC, 2006/42/EC.
For more information, please contact Exact Tools at the following address.
The technical fi le is available at the address underneath.
The person authorized to compile the thecnical fi le:
Mika Priha, R&D manager (mika.priha@exacttools.com)
Helsinki, 31.8.2012
Seppo Makkonen, Managing director
Exact Tools Oy
Särkiniementie 5 B 64
FI-00210 Helsinki
Finland
To Next Page
Loading...
