eXact PipeCut+Bevel 280 Pro Series - Page 6

Safety instructions
English
6
Exact PipeCut+Bevel 280 / 360 / 460 Pro Series
Voltage
230 V– 240 V / 50–60 Hz / 100 V–120 V 50–60Hz
Power
2500 W– 230 V– 240 V / 15 А-100 V– 120 V
No-load speed
I (low) = 1900/min, II (high) = 2885 /min
Blade diameter
140 mm (5.6"), 165 mm (6.50"), 180 mm (7.2"),190 mm (7.6")
Mounting bore
62 mm (2.44")
Weight
PipeCut+Bevel 280 Pro Series 16 kg (35 lbs),
PipeCut+Bevel 360 Pro Series 17,5 kg (40 lbs),
PipeCut+Bevel 460 Pro Series 18,5 kg (42 lbs)
Range of use PipeCut+Bevel 280 Pro Series
40 mm–280 mm (1.6"–11")
Range of use PipeCut+Bevel 360 Pro Series
75 mm–360 mm (3.0"–16")
Range of use PipeCut+Bevel 460 Pro Series
100 mm–460 mm (4"–17.5")
Max. pipe wall, plastics and other soft materials
45 mm (1.8”) 280
50 mm (2.0”) 360 and 460
Max. Pipe wall 230V, steel, iron
20 mm / 0.78”
Max. Pipe wall 120V, steel, iron
12 mm / 0.47”
Protection class
⧈ / II
Spindle lock
Yes
Speed preselection
Yes
Constant electronic control
Yes
Overload Protection
Yes
Reduced starting current
Yes
Vibration, A
h,M
”cutting metal”
3,2 m/s
2
Vibration uncertainty, K
0,3 m/s
2
LpA (sound pressure)
101,0 dB(A)
KpA (sound pressure uncertainty)
3 dB(A)
LWA (acoustic power)
112,0 dB(A)
KWA (acoustic power uncertainty)
3 dB(A)
Recommended generator capacity
4,9kVA for 230V, 3kVA for 100 V-120V
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these values can vary.