EXCURSION SX SAT - User Manual

Congratulates the user on owning an EXCURSION SX Series Component Speaker, highlighting design and engineering.

Prompts users to record dealer, purchase, and installation dates for service.

Warns about the risk of permanent hearing loss from prolonged exposure to high sound levels.

Details the 2-Layer Black Paper Cone with ADC Finish for sound quality and performance.

Explains phased plug dustcap for resolution and DIN sized vented steel basket for cooling and stiffness.

Highlights carefully designed voice coils and pure silk soft dome tweeters for superior audio performance.

Describes the SX-SAT satellite and compact Plug&Play crossovers for sound stage and integration.

Advises on professional installation versus DIY, emphasizing proper techniques and avoiding damage.

Covers checking fit, cavity depth, clearance, and ensuring a flat mounting surface.

Stresses attention to detail, protecting woofers from moisture, and preventing air leaks.

Discusses panel reinforcement and avoiding damage to wiring through sheet metal.

Guidance on cutting new mounting holes or utilizing existing ones, avoiding structural elements.

Recommends a low-volume listening test before securing speakers to verify functionality.

Caution to protect all speaker wiring from cuts or wear to prevent short circuits and damage.

Lists necessary tools for installation, including drill, screwdrivers, crimping tools, and sealants.

Emphasizes safety measures: wearing eyewear, disconnecting battery, and checking for hazards.

Illustrates wiring for SX-LPF (low-pass filter) and SX-HPF (high-pass filter) components.

Lists models SX-1S, SX-3C, SX-4C, SX-5C, SX-6C, SX-46C, SX-69C for this diagram.

Details wiring configurations for SX-LPF and SX-HPF with specific speaker models.

Shows wiring for SX-1S, SX-5C+, SX-6C+, SX-69C+ models.

Illustrates wiring involving SX-2WX (2-way crossover) and SX-LPF components.

Depicts wiring for SX-SAT, SX-5.3C, SX-6.3C, SX-69.3C models.

Lists speaker models, physical size, nominal impedance, and frequency response.

Details sensitivity (dB), magnet size, mounting depth, and power handling (RMS/Peak).

Specifies the 'Way' configuration (1, 2, or 3) and power ratings for each model.

Details the one-year limited warranty for defects in material and workmanship under normal use.

Lists situations where the warranty is void, such as physical damage or improper installation.

Outlines the process for returning products for service, including obtaining an RA# and shipping instructions.

Provides contact information and the physical address for returning products to EXCURSION Intl.