EXCURSION SXT 8D2 - Page 3

2
EXCURSION SUBWOOFER FEATURESXT.v1
TRANSFORMER ..oen discussed, oen rejected, always difficult, unreachable.
But me does not stop. The me in which ever greater amplifier performance is
always offered cheaper and thus make new demands on entry-level and mid-size
subwoofer is not only at EXCURSION today the present. Today calls for a new
category of subwoofers that takes into account and builds new demands for more
affordable performance. Subwoofers that are similar inexpensive and affordable
can perform what was previously the upper class and thus follow up with the
same technical development of the amplifiers. It's me and demand for a new
generaon and we present this T Generaon of 8/10/12/15" TRANSFORMER
between our well known REFERENCE and EXCELLENCE series columns.
The key to Generaon T was to go beyond the limits of steel sheet basket
geometry to reliably fix beyond 350oz engines for the first me, opening the
door to superclass performance with larger 3 "coils. The goal was immediately
set on this new cost-saving plaorm without further compromises but with
economic calculaon to dominate these new borders.
So we wind our proven and venlated aluminum coil former with pure OFC
copper up to a winding height of 45mm and result with this generaon SXT
already an outperform parameters of the several more expensive first generaon
SXE and SXX series and with comparably large motors. New requirements for
centering are here in double execuon with reinforced linear NOMEX centering
perfectly locked in mulple screwed rings and blood red design. Color accents
that repeat in the seams of the oversized high-density surrounds and leering.
Of course, all other known EXCURSION standards can be found in the SXT like
our massive double 8GA/10mm² high current terminals and here with a 300oz
dual stack motor which with a necessarily extended pole plate which oversized
venlaon openings have the charm of a revolver that just wants to be charged.
TRANSFORMER or Generaon T stands for a moo and the transformaon
into a new era of subwoofer producon. With dimensions of die cast baskets,
we have exceeded the limits with our T steel basket. With powerfully punched
EXCURSION brand logos and high efficient vent structure we use T basket
across the overall 2020 concept as our plaorm for our SXR REFERENCE, SXT
TRANSFORMER and SXE EXCELLENCE subwoofer. Follows us, but note our
warning SXT could missunderstand their moo and can also transform the
shape of your car.