EXHOBBY VOLANTEX RC - User Manual

The device described in the manual is the VolantexRC 6-Axis Gyro Easy Flying Trainer, an RC airplane designed for beginners.

Function Description

The VolantexRC 6-Axis Gyro Easy Flying Trainer is an RC airplane equipped with a 6-axis gyro system to facilitate easy flying, particularly for novice pilots. It features a one-key return function, allowing the plane to automatically return to its take-off direction. The gyro system has three levels of assistance (Manual/Gyro Off, Soft Gyro Assist, and Strong Gyro Assist) to cater to different skill levels. The plane is controlled via a 2.4GHz digital radio control system.

Important Technical Specifications

• Gyro System: 6-axis gyro for flight stabilization.
• Gyro Modes:
  • 0 - Away From You: Manual / Gyro Off (EXPERT)
  • 1 - At the Middle: Soft Gyro Assist (MIDD)
  • 2 - Towards You: Strong Gyro Assist (BEGINNER)
• Control System: 2.4GHz Digital Radio Control System.
• Battery: Li-Po/Li-Ion/Ni-Mh (specific type not detailed, but charging instructions cover these chemistries).
• Charging Time: Approximately 3.5 hours (never charge longer than 4 hours).
• Transmitter Batteries: 4 AA batteries.
• Propeller System: Propeller saver mechanism to prevent damage and overcurrent.
• Recommended Flying Conditions: Calm days without wind, especially for learning. Light winds (up to 5-7 mph) for experienced pilots. Avoid significant moisture (rain or snow).
• Recommended Flying Area: Local park, schoolyard, flying field, or similar large area free of people and obstructions (at least the size of a football/soccer field). Flying over grass is recommended for softer landings/crashes. Avoid parking lots, crowded areas, highways, railways, high tension lines, and residential areas. Designed for outdoors only.
• Age Recommendation: Not for children under 14 years.

Usage Features

• Easy Flying Trainer: Designed with a 6-axis gyro to assist beginners in learning to fly.
• Three Gyro Levels: Allows pilots to choose between manual control (gyro off), soft gyro assistance, or strong gyro assistance based on their experience.
• One-Key Return Activation: A dedicated button on the transmitter activates a function that makes the plane automatically turn around and fly back towards its take-off direction. This function needs to be activated each time the plane is powered on.
• Throttle Unlock (Arming): A safety feature requiring the throttle stick to be moved to max and then min position to arm the motor, preventing accidental propeller spin-up.
• Digital Trims: Allows for precise adjustment of rudder and elevator centered positions using digital trim buttons on the transmitter. A short "beep" indicates when the trimmer is centered.
• Pre-flight Checklist: Includes steps like turning on the transmitter first, ensuring throttle is at the bottom position before connecting the battery, and turning off the transmitter last.
• Hand-Launch or Take-off: Can be launched by hand or take off from a flat/level surface.

Maintenance Features

• Battery Charging: Uses a dedicated charger (included if applicable) designed for safe balancing and charging of Li-Po/Li-Ion/Ni-Mh batteries. Charging is done via a USB port.
• Gyro System Calibration: Instructions are provided to re-calibrate the gyro system if the airplane is not flying with the correct attitude. This involves holding the sticks in a specific position for several seconds until a "beep" sound is heard, calibrating the gyro to the current horizontal level.
• Propeller Saver: The propeller is designed to detach from the base upon impact with an obstacle, protecting the propeller from damage and preventing overcurrent to electronic components. It can be easily reinstalled by inserting the upper part centrally through the motor shaft until a "click" sound is heard.
• Propeller Replacement: Detailed steps are provided for replacing a broken propeller and shaft adaptor, requiring a Philips screwdriver and pliers.
• Control Surface Centering: Instructions on how to check and adjust the centering of the rudder and elevator using the push rods, ensuring proper flight control. This should be done with the gyro switch off (manual mode).
• Binding Instruction: Steps to bind the receiver to the transmitter, ensuring the receiver only responds to the specific transmitter. This process involves specific power-on sequences and gyro switch settings.