Need help?Do you have a question about the Extech Instruments CO100 and is the answer not in the manual?
General| CO Range | 0 to 1000ppm |
|---|---|
| Resolution | 1ppm |
| Response Time | <60 seconds |
| Accuracy | ±5% or ±10ppm (whichever is greater) |
| Operating Humidity | 10 to 90%RH |
| Display | LCD |
Turns the unit on or off.
Freezes the current reading in the display.
Selects the temperature display unit (°C or °F).
Enters clock mode to adjust date and time digits.
Activates or exits the alarm mode for CO2 alerts.
Allows setting of alarm thresholds for CO2 levels.
Sets CO2 thresholds for GOOD-NORMAL and NORMAL-POOR indications.
Increases a value during setting or function adjustment.
Decreases a value during setting or function adjustment.
Shows maximum or minimum recorded CO2, temp, and humidity.
Press this button to exit the current mode.
Port for connecting the AC power adapter.
Indicates the power status of the device.
Instructions for cleaning the meter and proper storage conditions.
Detailed performance data including range, resolution, and accuracy.
To Next Page
